JWorld@TW the best professional Java site in Taiwan
      註冊 | 登入 | 全文檢索 | 排行榜  

» JWorld@TW » Java IDE » NetBeans  

按列印兼容模式列印這個話題 列印話題    把這個話題寄給朋友 寄給朋友   
reply to postflat modego to previous topicgo to next topic
本主題所含的標籤
無標籤
作者 Re:netbeans的ide.cfg文件配置大集合 [Re:AstroWoo]
tzutolin



版主

發文: 335
積分: 4
於 2004-05-09 22:31 user profilesend a private message to usersend email to tzutolinreply to postreply to postsearch all posts byselect and copy to clipboard. 
ie only, sorry for netscape users:-)add this post to my favorite list
If you are an advanced NetBeans user, you may want to check this out.

There are some other choices you can do with ide.cfg. I list them here and you may want to have a lookSmile

Note: Use at your own risk for some experimental options as described below. This is only for NetBeans 3.6 or after.

Best regards,
tzutolin

Extended ide.cfg Windows System Configuration for Advanced Users

netbeans.winsys.imageSource
Valid values are path to image in NB like "org/netbeans/core/resources/splash.gir". It puts the specified image into the the emptied documents area. it is experimental now. -J-Dnetbeans.winsys.imageSource=org/netbeans/core/resources/splash.gif

netbeans.winsys.dndfade.on
Valid values are "true" and "false". Default is "false". If it is "true" it paint faded feedback during DnD of windows. Keep in mind it makes some performance impact on DnD. It is experimental now. -J-Dnetbeans.winsys.fade.on=true

netbeans.winsys.disable_dnd
Valid values are "true" and "false". Default is "false". If it is "true" it disables DnD of windows. -J-Dnetbeans.winsys.disable_dnd=true

netbeans.winsys.allow.dock.anywhere
Valid values are "true" and "false". Default is "false". It allows user to move (e.g. using DnD) TopComponentS between editor(document) and view which is restricte otherwise. It is experimental now. -J-Dnetbeans.winsys.allow.dock.anywhere=true

netbeans.winsys.oldtabs
Valid values are "true" and "false". Default is "false". If it is "true" it used the old tabs for the compponent containers. It is experimental now. -J-Dnetbeans.winsys.oldtabs=true

netbeans.winsys.oldtabs.view
Valid values are "true" and "false". Default is "false". If it is "true" it used the old tabs for the compponent containers, but only for view kind of containers. It is experimental now. -J-Dnetbeans.winsys.oldtabs=true

netbeans.winsys.oldtabs.editor
Valid values are "true" and "false". Default is "false". If it is "true" it used the old tabs for the compponent containers, but only for editor kind of containers. It is experimental now. -J-Dnetbeans.winsys.oldtabs=true

netbeans.tab.close.button.enabled
Valid values are "true" and "false". Default is "true". This switch is relevant only in case old tabs are used. If it is true tabs in JTabbedPane contain close button. It is possible to close given tab by clicking on this close button. It can be set on command line or in ide.cfg. Usage example: To disable close buttons use -J-Dnetbeans.tab.close.button.enabled=false

netbeans.winsys.hideEmptyDocArea
Valid values are "true" and "false". Default is "false". If it is "true" it doesn't show empty documents area. -J-Dnetbeans.winsys.hideEmptyDocArea=true

netbeans.winsys.statusLine.in.menuBar
Valid values are "true" and "false". Default is "false". If it is "true" it shows status line at the and of menu bar instead of the bottom of documents are (or main window). -J-Dnetbeans.winsys.statusLine.in.menuBar=true

netbeans.winsys.no_toolbars
Valid values are "true" and "false". Default is "false". If it is "true" it hides all toolbars. -J-Dnetbeans.winsys.no_toolbars=true

netbeans.winsys.menu_bar.path
If this property is set its value must point to a file on the system file system that provides instance of type org.openide.awt.MenuBar. This alternative menu bar will be used instead of the default one. -J-Dnetbeans.winsys.menu_bar.path=foo/bar.instance

netbeans.winsys.status_line.path
If this property is set its value must point to a file on the system file system that provides instance of type javax.swing.JComponent. This alternative status line will be used instead of the default one. -J-Dnetbeans.winsys.status_line.path=foo/bar.instance

netbeans.windows
Valid values are "mdi" and "sdi". It selects GUI mode in which window system is started. The "mdi" and "sdi" names are now obsoleted (together with the option). The "mdi" corresponds to "compact" mode and "sdi" corresponds to "selected" mode. It can be set on command line or in ide.cfg. Usage example: To start IDE in Selected mode use -J-Dnetbeans.windows=sdi


tzutolin edited on 2004-05-09 22:42
reply to postreply to post
話題樹型展開
人氣 標題 作者 字數 發文時間
8280 [精華] netbeans的ide.cfg文件配置大集合 AstroWoo 3711 2004-04-19 17:32
7044 Re:netbeans的ide.cfg文件配置大集合 tzutolin 39 2004-04-19 19:34
7224 Re:netbeans的ide.cfg文件配置大集合 AstroWoo 1737 2004-04-20 10:32
8134 Re:netbeans的ide.cfg文件配置大集合 tzutolin 4511 2004-05-09 22:31
» JWorld@TW »  Java IDE » NetBeans

reply to postflat modego to previous topicgo to next topic
  已讀文章
  新的文章
  被刪除的文章
Jump to the top of page

JWorld@TW 本站商標資訊

Powered by Powerful JuteForum® Version Jute 1.5.8